Overview
The Luminos Edge Coupled “T” Alignment System is configurable for through-channel optical alignment of single channel and multiple channel fiber arrays, to various planar waveguide substrates. The “T” configuration denotes the use of Input & Output alignment stages with fiber holders, and a Center stage with a substrate holder, such as a vacuum part holder.
The high stiffness and stability of Luminos Positioners makes ultra-precise alignments possible. Luminos dual compensated flexure systems allow for manual or automated alignment of assemblies with mode fields as small as 1-2µm. The complete Luminos Edge Coupled "T" Alignment System as shown is available for your application for less than the cost of a typical isolation station.

Featured Configuration
1. I6000 6-Axis XYZ/RYP Manual Positioners, Qty 2
2. I3000 3-Axis XYZ Axis Linear Positioner
3. ADP001 3 Axis to 5/6 Axis Adaptor Block
4. VPH007 Vacuum Part Holder (shown with 5mmx5mmx1.0mm substrate)
5. FH003-S-1 Fiber Holder, Standard Right
6. FH003-M-1 Fiber Holder, Mirrored Left
7. CSS Contact Sensing System, Qty 2
8. LINR300 Linos 40x300mm Mounting Rail
9. LINR150 LInos 40x150mm Mounting Rail
10. LINRC-STG-SI  Linos 40mm Wide Rail Carrier, Type: Stage, includes adaptor, Qty 3
11. BP006 380x380x25mm solid aluminum Base Plate

Options
• ​Adapter Plates AMA003 and AMA004 provide a simple way to use existing standard optical equipment with Luminos Alignment Systems.
• Use a Luminos I1000 1-Axis Positioner with an ADP004 Adaptor Block to provide a cost effective alternative to the Luminos I3000 3-Axis Center Positioner shown.