OP280带状光纤可见光故障定位仪是设计用来测量带状光纤,混合光缆,及分线器内部…
More >>插损及链路损耗测试 与Greenlee 567XL光功率计配对使用,573XL是测多模光纤和连接器插…
More >>易于使用,三键控制所有功能 插损测量(dB);功率测量(dBm) 测量分辨率0.01dB …
More >>通过传感器探头,把测定的电场强度转换为光信号,通过光纤进行传送后,通过控…
More >>OP1100光纤瞬断仪是一台即插即用的光纤检测系统,可以按照EIA/TIA-FO TP-32A标准要求自…
More >>OP1021是方便紧凑的台式光纤环形通量测试仪。 配合在Windows电脑软件系统下运行的OPL…
More >>OP-METS专为光跳线或无源器件设计的多通道环境测试系统,通道数最多可达144个。 …
More >>使用OptoTest公司的OP752多通道模场调节器,您可以快速满足多通道测试对环形通量,M80…
More >>OP712配合相应的测试软件,可精确测量绝对光功率值及插损值,尤其适合单芯连接器测…
More >>OP-SPHR积分球设计用来测试高密度连接器(MTP?/MPO)或者裸光纤。 通过在腔体内均匀反…
More >>OptoTest公司的LAAD-MXC适配器, 是市场上第一个测试USconc公司MXC连接器的解决方案,配OP…
More >>OptoTest’公司的LAAD-PRIZM适配器专为PRIZM?连接器测试而设计,配合OPTOTEST大面积外置探…
More >>OptoTest’s OP480MT MultiFiber Polarity Tester automates testing for broken and crossed fibers with immediate…
More >>The OP510 was designed as a cost effective solution for measuring, monitoring and logging of insertion loss or…
More >>The OptoTest OP715 Benchtop LED/LASER Source can be configured up to 4 channels with a mix of LEDs and/or LASE…
More >>可见光故障定位仪…
More >>The OP725 is an optical switch for single mode or multimode applications available in a slim-line, half-rack e…
More >>The OP250 is a configurable stabilized light source available with a variety of LASERs or LEDs. Offered in a s…
More >>OptoTest’s Remote Head Power Meters (OPRH) create a highly adaptable fiber optic test environment when coupl…
More >>The OP1302 offers an economical approach for optical power measurement applications where multiple connector t…
More >>The OptoTest OP735 Benchtop Optical Power Meter can be configured with up to 4 channels and a mix of InGaAs, S…
More >>The OP508 was specifically designed as a cost effective solution for measuring, monitoring and logging inserti…
More >>op720为单多模应用多通道开关,结构紧凑,USB驱动采用了最新的高速光开关技术。…
More >>OP710提供了需要测量多通道光功率的经济解决方案。 与其他系统不同的是, 本仪表…
More >>便携式光源,插损及链路损耗测试…
More >>Tempo便携式光功率计 硅光功率计,635nm,780nm,850nm…
More >>850nm LED 便携式光源…
More >>100/140M850nm手持式光源…
More >>24芯台式MTP光纤极性测试仪,前面板模块可更换,1.5秒内判定MTP/MPO极性,同时, 多台…
More >>